Panthenine Inhibitors ELOTEX ERA200
Product overview
ELOTEX ERA200 powdered highly active inhibition additive for cementitious mortars.
ELOTEX ERA200 special additive is designed for use in cementitious construction plasters, batches and mortars. It can eliminate or significantly reduce the occurrence of primary and secondary alkali in mortar
ELOTEX ERA200 is particularly recommended for use in tile caulk, batch mortars such as 2-in-1 mortar or putty, masonry plastering or other outdoor mortar products.
ELOTEX ERA200 inhibits the production of pansoda through a variety of mechanisms, including reduced void penetration, reduced soda crystal size and reduced water infiltration. It can keep the building material beautiful appearance for a long time.
ELOTEX ERA200 has a significant effect on inhibiting both primary and secondary panalkaline. In addition to reducing the risk of efflorescence, ELOTEX ERA200 can also improve the stability, workability and dispersion/wetting of wet mortars to improve color stability and vibrancy. In addition, it can improve the surface hydrophobic effect (a feature often required by some coloring mortars).
ELOTEX ERA200 is free of plasticizers, solvents and film-forming additives.
advantage
· Powdered cementitious mortar inhibits flooding agents
· Improved color stability
· Improve color vibrancy
· Ideal for eliminating or drastically reducing the occurrence of primary and secondary famphathena
· Increases the hydrophobicity and hydrophobicity of the surface
· Maintain the long-term aesthetic appearance of building materials
· highly efficient
· Compatible with other additives
· Good ease of use and wettability
· Excellent workability
· Improved mortar rheological state
· It has wetting and dispersing effect
Recommended apps
· Tile caulk
· Plaster or plaster mortar
· Two-in-one batch of mortar (monocouche)
· Decorative texture mortar
· Putty
· External insulation composite mortar
· Molded mortar
· Imitation stone mortar
· Masonry mortar
Mixing of powders
The ELOTEX ERA200 can be mixed with other dry materials in a standard compulsory mixing plant to produce cementitious powdered products.
It is recommended to keep the mixing time as short as possible to avoid significant temperature increases caused by high shear forces. Both water-hard and non-water-hard dry mixes with ELOTEX ERA200 can be easily mixed with water before construction.
When mixing powdered finished products, the mixing water is usually injected in the required amount in a suitable container, and then the powdered dry mix is added while stirring. Stirring too strongly can introduce excess air bubbles. Before use, the mixture should be allowed to sit for a while. Depending on the properties of other additives, the sitting time is about 1-5 minutes.
Dosage and mixing
ELOTEX ERA200 has excellent mixing properties with water.
The recommended dosage for ELOTEX ERA200 is 0.1-0.4%, depending on the final demand of the product. It is recommended to keep the mixing time as short as possible
Compatibility
ELOTEX ERA200 has good compatibility with mortar additives such as redispersible rubber powders, early strength agents, retarders, cellulose ethers, etc.
WeCha
QingChuangHaiYe Environmental Protection Technology (Beijing) Co., Ltd.Is a professional distributor of high-quality titanium dioxide, building materials functional additives and high-performance coating additives,
We have passed the quality management system certification. After more than ten years of hard work,
We have established a service network integrating sales, technical support and logistics in the two cities of Beijing, Tianjin, Hebei, Shandong, Henan, Shanxi and Hubei.
ADD
China National Building Materials Research Institute, 1 Guanzhuang Road, Chaoyang District, Beijing